Ameriphone Q90 User Manual
Page 18
1. Press Power to
turn on the Q90.
2. Use the Q90 to
dial your relay
service number.
3. After your call is
answered,
press F4 and
the Q90 will auto-
matically send
text requesting
VCO relay service.
16
F. VCO (Voice Carry Over) Calls
CHAPTER 6
(CONTINUED)
instructions supplied with the
printer to line up the top of the
paper with the top of the printer
head.
3. Make sure that the Q90 Form
Feed function is on. (See
“Changing Menu Mode Settings,”
page 9.)
4. Make a call as usual.
Note:
Many printers will print a line of
text after you have typed or received
about 80 characters. Then they will
pause until you have typed or received
another 80 characters before printing
the next line of text.
3. Printing a Conversation with a
Laser Printer or Ink Jet Printer
1. Turn on the printer and the Q90.
2. Make a call as usual.
Note:
Many laser printers and some ink
jet printers will print one full page of text
at a time. If your
conversation fills less
than a full page,
send the printer a
“Form Feed”
command by
holding Ctrl and
pressing Return .
Then, your
conversation will
be printed.
S
D
Z
X
Shift
Ctrl
Ctrl
4. Printing a Conversation Stored in
Memory
1. After you finish
a conversation
and hang up,
press Ctrl F7
and the Q90 will
automatically
print everything
stored in conver-
sation memory.
Note:
The Q90 is compatible with many
printers. However, due to the variety of
printing methods used by different
printer manufacturers, you may need to
refer to the printer instruction manual
and try different settings to get the best
results.
Z
X
Shift
Ctrl
Ctrl
F6
F8
F9
%
^
&
*
5
6
7
8
SAVE
H
1
MSG 2
F7
Hi-SPEED
?
/
Shift
Power
Power