Ameriphone Q90 - Manual (Page 9)

1.Connect one end of the phone cord
into the back of the Q90 marked TO
LINE.
2.Connect the other end of the phone
cord to the telephone wall jack
(as shown in Figure 3).
CHAPTER 4
INSTALLATION
B. Direct Phone Line Connection
1.Connect the AC adapter plug
into the back of the Q90 marked 12
VDC.
2.Plug the AC Adapter into your wall
outlet (as shown below).
Note: The AC adapter provides power to
operate the Q90 while automatically
charging the rechargeable batteries in
the battery compartment. You should
only use the AC adapter supplied with
your Q90. When the Q90 is not in use,
turn the power off, but keep the AC
Adapter plugged in.
Figure 3 - Power and Phone Line Connection
A. Power Connection
7
TO
LINE
TO
PHONE
HCO
SPEAKER
12 VDC
300 MA
CELLULAR
(2.5MM)
TO LINE TO PHONE
HCO SPEAKER 12 VDC
300 MA
CELLULAR (2.5MM)
Figure 4 - Telephone Connection
C. Telephone Connection
The Q90 can share a telephone wall
jack with a regular phone (or an exter-
nal flashing device). This is especially
useful for household members that do
not use a TTY.
Connect an external telephone to the
jack in the back of the Q90 marked
TO PHONE (as shown above).
Note: The Q90 can also be used with
pay phones that have a data port. Plug
one end of the phone cord into the TO
LINE jack on Q90. Plug the other end of
the phone cord into the data port on the
pay phone.