Konica Minolta magicolor 5650 - Manual (Page 178)

Printing With NetWare 158
5
In Administrator mode of PageScope Web Connection, select NetWare
from the Network tab, and then specify the following settings.
– NetWare Print: Select Enable.
– Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
– Mode: Select NPrinter/RPrinter.
– Printer Name:
Specify the printer name. (Default: MC5670-XXXXX or
MC5650-XXXXX)
– Printer Number:
Specify the printer number (0-255). When 255 is specified, the set-
ting is Auto.
6
Restart the printer (turn the printer off, then on again)
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that created printer is shown as Waiting for Job for the con-
nected printer (0).