Konica Minolta magicolor 5650 - Manual (Page 354)

Configuring the Printer 334
The Print - Default Settings - Camera Direct Settings allows you to config-
ure the following items:
Item Description
Camera Direct
Print If Enable is selected, camera direct printing is enabled.
If Disable is selected, camera direct printing is disabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
INTERFACE MENU - CAMERA DIRECT
Paper Source Specifies the tray that is used for camera direct printing.
Choices: Tray1, Tray2, Tray3, Tray4
Default: Tray2
Configuration Menu Equivalent:
CAMERA DIRECT - PAPER SOURCE
"
Tray3 and Tray4 appear only if the optional lower
feeder units are installed.
Layout Specifies the number of images printed on a single sheet
of media.
If 1-up is selected, only one image will be printed on a sin-
gle sheet of media.
Choices: 1-up, 2-up, 3-up, 4-up, 6-up, 8-up
Default: 1-up
Configuration Menu Equivalent:
CAMERA DIRECT - LAYOUT
Paper Margin Specifies the size of the media margins (area that is not
printed in).
If Standard is selected, the standard media margin size is
specified.
If Minimum is selected, the media margins are reduced.
Choices: Standard, Minimum
Default: Standard
Configuration Menu Equivalent:
CAMERA DIRECT - PAPER MARGIN
Brightness Specifies the brightness of the printed image.
Choices: -15%, -10%, -5%, 0, +5%, +10%, +15%
Default: 0
Configuration Menu Equivalent:
CAMERA DIRECT - IMAGE QUALITY -
BRIGHTNESS