Konica Minolta magicolor 5650 - Manual (Page 395)

Configuring the Printer 375
SNMP
v3(IP) If Enable is selected, SNMP v3(IP) is enabled.
Choices: Enable, Disable
Default: Enable
SNMP
v1(IPX) If Enable is selected, SNMP v1(IPX) is enabled.
Choices: Enable, Disable
Default: Enable
UDP Port Specifies the UDP port number.
Range: 1 - 65535
Default: 161
SNMP v1/
v2c/(IP) Read
Commu-
nity Name Specifies the community name to be used for scan-
ning.
Range: Up to 15 characters
Default: public
Write If Enable is selected, Write is enabled.
Choices: Enable, Disable
Default: Enable
Write
Commu-
nity Name Specifies the community name to be used for read-
ing and writing.
Range: Up to 15 characters
Default: private
SNMP v3 Context
Name Specifies the context name.
Range: Up to 63 characters
Default: [Blank]
Discovery If Enable is selected, Discovery is enabled.
Choices: Enable, Disable
Default: Enable
Discovery
User
Name Specifies the user name for detection.
Range: Up to 32 characters
Default: public
Read User
Name Specifies the name of read only user.
Range: Up to 32 characters
Default: initial
"
The same name specified as the Discovery
user name cannot be used.
Item Description