Konica Minolta magicolor 5650 - Manual (Page 319)

Configuring the Printer 299
The System - Status Notification Settings window allows you to configure
the following items:
Item Description
IP Address Notification
Address Specify the IP address of the SNMP trap
receiver. An IPv4 or IPv6 address or a
host name can be specified.
Range: Up to 63 characters
Default: 0.0.0.0
Port Num-
ber(1-65535) Specify the port number of the SNMP
trap.
Range: 1 - 65535
Default: 162
Community
Name Specify the community name for the
SNMP trap.
Range: Up to 15 characters
Default: public
IPX Address Notification
Address Specify the IPX address of the SNMP trap
receiver.
Range: 8 characters
Default: 00000000
Node Address Specify the node address of the SNMP
trap receiver.
Range: 12 characters
Default: 000000000000
Community
Name Specify the community name for the
SNMP trap.
Range: Up to 15 characters
Default: public
Email Address Email Notice Specifies whether or not a notification is
sent by e-mail when a warning occurs in
the printer.
Choices: Enable, Disable
Default: Enable
Notification
Address Specifies the e-mail address where the
notification is sent.
Range: Up to 320 characters
Default: [Blank]