Konica Minolta bizhub C284e - Manual (Page 113)

Authentication Manager 3
Authentication Manager 3-96
- Automatically synchronizing external server and user information
2
Note
- Supported search-related functions are only Microsoft Active Directory
and LDAP.
- The "User automatic registration" settings are different from the search
base settings of "User search condition". If authentication succeeds,
users are automatically registered even when they are outside the range
specified in Search Base.
When performing authentication based on IC card information existing on
the external server, type in the IC card information attribute name. Do not
type anything in other cases.
1
Type in the name of the external server for [External Server Name].
2
Select whether to automatically register a user.
– Selecting "Yes" for "User automatic registration" automatically
registers a user who is not registered with Authentication Manager
if that user is successfully authenticated.
3
From [Server Type], select a type of the external server to be specified.
– "Microsoft Active Directory", "LDAP", "NTLM", or "Novell NDS" can
be selected.
4
Click the [Switch Display] button.
Detail settings are switched according to the server type selected for
[Server Type].
5
Specify detail settings for the external server.
– Available settings vary depending on the type of external server
selected.
6
Specify conditions required to search for a user (AD/LDAP only).
– User search condition
– User Information Request List
– Auto Sync
7
Check the settings, and then click the [Apply] button.
– To check if the entered user search condition is correct, click the
[Test Connection] button. When "NTLM" or "Novell NDS" is
selected for [Server Type], the [Test Connection] button is disabled.