Konica Minolta bizhub C284e - Manual (Page 13)

Introduction 1
Authentication Manager 1-2
1.2 General setup operation
In order to use Authentication Manager, configure settings in the following
order.
1.2.1 Server settings
Log on to Enterprise Suite as a system administrator, and then specify
settings for the following. The following settings are necessary to enable
Authentication Manager.
1.2.2 Setting up the device
In order to use Authentication Manager, configure the following device
settings.
Before installing the application, use Web Connection to configure the
following settings.
-
Click the "Security" tab, click "SSL/TLS Setting", and then configure SSL
settings.
- Click the "Network" tab, select "OpenAPI Setting", and then select the
"Use SSL/TLS" check box, or select "Accept SSL communication only"
from the drop-down list.
- Click the "Network" tab, select "TCP Socket Setting", and then select the
"Use SSL/TLS" check box.
2
Reminder
For details on using Web Connection, refer to the User's Guide for the
device.
Function Description
Device List • Device Auto Discovery: Specify the conditions for searching for
devices to be registered.
• Manual Device Registration: Manually register devices that can-
not be found automatically.
• Device Management Settings: From the found devices, specify
the devices to be managed.
• Device Information Settings: Specify the communication set-
tings for each device.
For details, refer to the "Device Manager User's Guide".
Authentication Manager • External Server Settings: If authentication is performed by using
an external server, register the name of the external server.
(page 3-94)
• Device Management: Determine the devices that are authenti-
cated by Authentication Manager. Various settings for authenti-
cating devices can also be specified. (page 3-103)
Server Settings • E-mail Server Settings: Select whether or not to use e-mail func-
tions, such as notifications.
For details, refer to the "Device Manager User's Guide".