Konica Minolta bizhub 20 - Manual (Page 112)

105
11
11
Overview
11
This chapter explains how to resolve typical network problems you may encounter when using the machine.
If, after reading this chapter, you are unable to resolve your problem, please visit at: http://konicaminolta.com/
This chapter is divided into the following sections:
„ General problems
„ Network print software installation problems
„ Printing problems
„ Scanning and PC Fax problems
„ Protocol-specific troubleshooting
General problems
11
CD/DVD-ROM is inserted, but does not start automatically
11
If your computer does not support Autorun, the menu will not start automatically after inserting the
CD/DVD-ROM. In this case, execute Start.exe in the root directory of the CD/DVD-ROM.
How to reset the KONICA MINOLTA print server back to the factory default
11
You can reset the print server back to its factory default settings (resetting all information such as the
password and IP address information). (See Restoring the network settings to factory default on page 42.)
My computer cannot find the machine/print server.
I cannot make a necessary connection to the machine/print server.
My machine/print server does not appear in the window of Remote Setup, BRAdmin Light.
11
„ Windows ®
The Firewall setting on your computer may be rejecting the necessary network connection to the machine.
In this case, you will need to disable the Firewall on your computer and re-install the drivers.
Windows
®
XP SP2 users:
11
a
Click the Start button, Control Panel, Network and Internet Connections.
b
Click Windows Firewall.
c Click the General tab. Make sure that Off (not recommended) is selected.
d Click OK.
Note
After the KONICA MINOLTA software package is installed, turn your Firewall back on.
Troubleshooting
11