Konica Minolta bizhub 20 - Manual (Page 27)

Control panel setup
20
3
Gateway
3
This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose TCP/IP.
Press OK.
d Press a or b to choose Gateway.
Press OK.
e Enter the Gateway address using the dial pad. (To enter numbers and text, see Entering Text
on page 125.)
Press OK.
f Press Stop/Exit.
Node Name
3
You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will
be the name that is registered by the WINS server on your network. KONICA MINOLTA recommends the
name “KMNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose TCP/IP.
Press OK.
d
Press a or b to choose Node Name.
Press OK.
e
Press 1 to choose Change.
f
Enter the Node Name using the dial pad. (To enter numbers and text, see Entering Text on page 125.)
Press OK.
g
Press Stop/Exit.