Konica Minolta bizhub 20 - Manual (Page 118)

Troubleshooting
111
11
i Make sure if the new setting is added and is checked, and then click OK.
Note
After the KONICA MINOLTA software package is installed, turn your Firewall back on.
Windows Vista
®
users:
11
a Click the button, Control Panel, Network and Internet, Windows Firewall and click
Change settings.
b When the User Account Control screen appears, do the following.
„ Users who have administrator rights: Click Continue.
„ For users who do not have administrator rights: Enter the administrator password and click OK.
c Make sure that on (recommended) is selected on the General tab.
d Click the Exceptions tab.
e
Click the Add port... button.
f
To add port 54925 for network scanning, enter the information below:
1. In Name: Enter any description, for example, “KONICA MINOLTA Scanner”.
2. In Port number: Enter “54925”.
3. Make sure UDP is selected.
4. Click OK.
g
Click the Add port... button.
h To add port 54926 for network PC Fax, enter the information below:
1. In Name: Enter any description, for example, “PC Fax”.
2. In Port number: - Enter “54926”.
3. Make sure UDP is selected.
4. Click OK.
i Make sure that the new setting is added and is checked, and then click Apply.
j If you still have trouble with your network connection such as network scanning or printing, check
File and Printer Sharing box in the Exceptions tab and then click Apply.
Note
After the KONICA MINOLTA software package is installed, turn your Firewall back on.