Konica Minolta bizhub 20 - Manual (Page 21)

Configuring your machine for a network
14
2
d Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask and
Gateway (if needed) of your print server.
e Click OK.
f With the correctly programmed IP address, you will see the KONICA MINOLTA print server in the device
list.
Using the control panel to configure your machine for a network
2
You can configure your machine for a network using the control panel Network menu.
See Control panel setup on page 17.
Using other methods to configure your machine for a network
2
You can configure your machine for a network using other methods.
See Other ways to set the IP address (for advanced users and administrators) on page 113.
Windows ® Macintosh