Konica Minolta bizhub PRESS 2250P - Manual (Page 20)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 20 -
5. Troubleshooting
There are some Errors or Fault codes that may be solved by the operator:
 When the Trim Waste Bin is full or Cutting
Waste is prevented from falling down into
the Waste Bin, the message ‘Empty Trim
Bin’ will be displayed (Fig. 1).
 When a Paper Jam appears, like Clear
Area, the message ‘Error STR…’ will be
displayed.
Fig. 1
5.1 Trim Waste Bin Full
Fig. 2 Fig. 3
Step Action Remarks
1. Open the Trim Waste Drawer. (Fig. 2)
2. Empty both Trim Waste Bins (A). (Fig. 3)
3. Remove the remaining Cutting
Waste.
It is possible that there still is some Cutting
Waste left inside the STR.
4. Place the Trim Waste Bins back
in the Trim Waste Drawer. (Fig. 3)
5. Close the Trim Waste Drawer. (Fig. 2)
A