Konica Minolta bizhub PRESS 2250P - Manual (Page 27)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 27 -
6. Cleaning / Maintenance (continued)
6.2 Cleaning the belts (continued)
Fig. 1 Fig. 2
Step Action Remarks
5. Clean the belts The upper belt (B) can easily be rotated in either
direction. The lower belts (A) can be rotated in either
direction by pulling them (Fig. 1).
6. Place the belts in normal position. (It is possible that after cleaning and rotating the belts,
the belts are removed from their normal position.)
7. Remove the paper Remove the paper between the Trim Drawer and the
Front cover.(Fig. 2).
8. Turn ‘ON’ the STR.
A ‘Cover Open’ message will appear.
9. Close the Top Cover.
The Knife blocks will automatically return to the
position which was set for the current Job.
A
B