Konica Minolta bizhub PRESS 2250P - Manual (Page 22)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 22 -
5. Troubleshooting (continued)
5.2 Clearing a Paper Jam (continued)
5.2.2. Clearing Jams - Inside STR (continued)
Fig. 1 Fig. 2
Step Action Remarks
1.
1.1.
1.2.
Open the Top Cover.
Close the Top Cover.
The STR is trying to empty the
machine. The STR will automatically try to empty the machine
when a Paper Jam is detected.
When the jam is not cleared, the Knife blocks
will automatically move outward to create
space..
2. Pay attention to the indicated
area
Pay attention to the indicated area displayed on the
UI.
3. Open the Top Cover.
4. Turn ‘OFF’ the STR.
5. Clear the indicated area: Take the
booklet out of the machine Pull the belts (A) in the STR towards the input area.
The booklet will move into the STR.
Pull the belts (B)in the STR towards the output area.
The booklet will move into the STR.
6. Take the booklet out of the
machine. Push or pull the booklet inside the STR so it is possible
to take the booklet out of a machine.
7. Turn ‘ON’ the STR.
A ‘Cover Open’ message will appear.
8. Close the Top Cover of the STR.
The Knife blocks will automatically return to the
position which was set for the current Job.
A
B