Konica Minolta bizhub PRESS 2250P - Manual (Page 16)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 16 -
4. Operating the STR (continued)
4.7 Side Trim ON / OFF
Fig. 1 Fig. 2
Fig. 3
Fig. 4 Fig. 5
Step Action Remarks
1. Side Trim ON/OFF Use the ‘
▲ / ▼ ’ buttons on the UI to select ‘Side Trim’
and press the ‘Enter’ button (Fig. 1).
2. Adjust ‘Side Trim’ Use the ‘ + / -‘ buttons to select ON / OFF
3. Adjust ‘Finished Size’ Use the ‘
▲ / ▼ ’ buttons (Fig. 3) to select ‘Finished Size’
and use the ‘ + / -‘ buttons to adjust the ‘Finished Size’.
Press ‘Enter’ (Fig. 3) to confirm the settings.
4. Save settings. After all desired settings are adjusted press ‘Jobs’
(Fig. 4) and press ‘Enter’ (Fig. 5) to save the settings.
A “Saving Job” message appears for a few
seconds.