Konica Minolta bizhub PRESS 2250P - Manual (Page 26)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 26 -
6. Cleaning / Maintenance
6.1 General
6.2 Cleaning the belts
The belts of the STR need to be cleaned regularly during normal conditions and if the STR has not been
used for a period of time. How often this should be done depends on the paper type and print quality.
An increasing number of jams is an indication of the need to clean the belts.
Fig. 1 Fig. 2 Fig. 3
Step Action Remarks
1. Cover reflection sticker. Take a paper (A) fold it in the middle and put it between
the Trim Waste Drawer and Front cover (Fig. 1 & 2).
2. Open and close the Top Cover. (Fig. 3)
The Knife blocks will automatically move
outward to make space for cleaning the belts.
3. Open the Top Cover
4. Turn off the STR (Continue next page)
Before Cleaning or Maintenance, always make sure to disconnect the power cord.
An increasing number of jams is an indication of the need to clean the belts.
The exterior can be cleaned with a slightly moist cloth.
With the exception of the belts, the interior of the STR does not require cleaning.
Clean the belts with water and a lint free cloth.
A