Konica Minolta bizhub 751 User Manual

Page 8

Advertising
background image

Keyboard Operation Notes:

To clear all characters Press the [C] key.

To delete the last character entered Touch [Delete].

To show the upper case/symbol screen Touch [Shift].

To go back to the HDD Settings screen Touch [Cancel].

6

Touch [OK], Re-Enter the Encryption Key and Touch [OK].

If the Encryption Key entered does not meet the requirements of the Password Rules, a
message appears that tells that the Encryption Key entered cannot be used. Enter the
correct Encryption Key. For details of the Password Rules, see Appendix C.

If there is a mismatch in the Encryption Keys, a message appears that tells that there is a
mismatch in the Encryption Keys. Enter the correct Encryption Key.

7

Make sure that a message appears prompting you to turn OFF and then ON the main power
switch. Now, turn OFF and then turn ON the main power switch.

When the main power switch is turned off, then on again, wait at least 10 seconds to turn it
on after turning it off. if there is no wait period between turning the main power switch off,
then on again, the machine may not function properly. Here is the sequence, through which
the main power switch and sub power switch are turned on and off:
Turn off the sub power switch >

Turn off the main power switch > Turn on the main power

switch

> Turn on the sub power switch

8

The following screen appears after the machine has been restarted.

Advertising