Konica Minolta IC-308 - Manual (Page 14)

1-4
1.1 Turning the Power ON/OFF
C
Press the Menu button on the control panel ( ),
press row selection button 4, then select [Shut Down
System] (
).
NOTICE
NOTICE
After this machine has exited completely, turn the Image Controller IC-
310 or Image Controller IC-308 system off.
D
When the system has quit, turn the power switch on the rear side off ( ).
Tips
The Image Controller IC-310 or Image Controller IC-308 can reset Fiery software or restart the entire system as
necessary.
- To reset only the Fiery software, press the Menu button on the control panel, then use the row selection button
to select [Restart Server] - [Restart Server] in sequence. In this case, do not reboot the Windows operating
system.
- To reboot the entire system including the Windows operating system, press the Menu button on the control
panel, then use the row selection button to select [Restart Server] - [Reboot System] in sequence.
- You can set the Image Controller IC-308 to turn on or off at the same time when the power of the main body is
turned on or off. For details, refer to the User's Guide supplied with the Fiery Color Server.
ON
OFF