Press [exit print mode – Konica Minolta IC-308 User Manual
Page 52
Advertising
5-4
5.1
Both Sides Adjustment
G
Press [Exit Print Mode].
H
Measure the line length at each of points
[1] to [8] on the printed-out chart using a
scale.
-
The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated in
this example, measure the line length at each
printed point.
-
The measurement value can be entered in
units of up to 0.1 mm.
-
Write down the measured lengths so that you
do not forget them.
[ 1 ]
[ 5 ]
[ 7 ]
[ 6 ]
[ 8 ]
[ 2 ]
[ 3 ]
[ 4 ]
[ 1 ]
[ 5 ]
Advertising
This manual is related to the following products: