Konica Minolta IC-308 - Manual (Page 98)

7-10
7.3 Convenient Use of Scan Function (Scan to SMB)
) In a Macintosh environment
Tips
To carry out this task, the computer's administrator privilege is required.
A
Select [About This Mac] - [More Info…] to check [IP Addresses] and [User name].
B
Enable file sharing.
In the Apple menu, click [Preferences...] - [Sharing] to open the [Sharing] window, then select the [File
Sharing] check box.
C
Enable the SMB-base sharing.
Click [Options] in the [Sharing] window, select the [Share files and folders using SMB (Windows)] check
box, then select the check box of the login user name (displayed name).
D
Set to a shared folder.
Click [+] on the [Sharing] window, select a folder to be shared, then click [Add]. Then, check that the user
name and access rights of the folder are set to the [Read & Write] mode.
Step 2: Connect this machine to the network
To connect this machine to the network, check that:
- The LAN cable is connected.
- The IP address is assigned to this machine.
Tips
To configure the network settings, select WebTools - [Configure] - [Launch Configure] - [Network]. For details, refer
to the HTML User's Guide.
Step 3: Prepare the operating environment for SMB transmission
Enable the SMB transmission function.
Set [SMB Send Setting] of this machine to [Enable] (in general use, you do not need to change the default setting).
Tips
For details, refer to the HTML User's Guide.
Step 4: Configure settings according to your environment
Register destinations that are frequently used.
- This can save many steps to manually enter destinations.
- Select [SCAN] screen of this machine to register the SMB server.
- You can also use [Scan Address Register] in [UTILITY] to register the setting.
Tips
For details about how to register destinations, refer to the HTML User's Guide.