Konica Minolta IC-308 - Manual (Page 90)

7-2
7.2 Name of each Component
7.2 Name of each Component
External components
2
6
7
8
9
3
4
10
5
1
No. Name Description
1 Toner access door When adding toner, press the left-hand lever to open this door.
2 Touch panel Displays a screen such as the [MACHINE] screen to enable you
to carry out machine operations and settings. Also, operation or
troubleshooting procedures can be provided.
3 Control panel Performs operations or configures settings.
4 Port (type A) (USB 2.0/1.1 compati-
ble) Used to connect devices such as backup HDD, keyboard, and
mouse.
This port is available for low-power devices only.
Provide an external supply of power for devices that require a
large amount of power.
5 Sub power switch Turns the sub power of the machine on or off.
6 Right side door Open when handling a paper jam.
7 Waste toner box door Open when replacing a waste toner box.
8 Left side door Open when handling a paper jam.
9 ADF (Option) Scans data while automatically feeding an original page by
page. This device automatically inverts a double-sided original
to scan data.
10 Tray 1/2/3 (Option) Up to 1390 sheets (80 g/m 2 / 21 lb Bond) can be loaded into
Tray 1/2 (upper tray / middle tray), and up to 1850 sheets (80
g/m
2
/ 21 lb Bond) into Tray 3 (lower tray).