Konica Minolta bizhub 364e - Manual (Page 32)

How to Use the Authentication Unit 3
AU-211P 31
Setting Up LDAP
Register the desired LDAP server to search for the destination.
On the MFP control panel, tap [Utility] - [Administrator Settings] - [Network
Settings] - [LDAP Settings] - [Setting Up LDAP].
Item Description
LDAP Server Name Specify the LDAP server name (up to 32 characters).
Max. Search Results Enter the maximum number of items that can be
received as address search (LDAP) results.
Timeout Specify the timeout period for address search (LDAP).
Initial Setting for Search
Details Specify address search (LDAP) conditions.
Change Search Attribute Select the attribute of the name used for LDAP
searching.
You can toggle this attribute between [Name] (cn) and
[Nickname] (displayName).
Search Select whether to display candidate destinations when
entering part of a name.
Server Address Specify the conditions of address search (LDAP).
Search Base Specify the search starting point in the directory
structure under the LDAP server (up to 255 characters).
This search function also covers subdirectories under
the specified starting point.
SSL Setting Select [ON] to encrypt communication between the
MFP and LDAP server with SSL.
Port Number Specify the LDAP port number.
Port Number (SSL) Enter the desired port number for SSL communication.