Konica Minolta bizhub 364e - Manual (Page 54)

How to Use the Authentication Unit 3
AU-211P 53
6
Select the [Realm(Domain)] and [IC Card Reader CSP], and click [OK].
– The value of [Realm(Domain)] corresponds to the registration
number of the Active Directory. When using the Active Directory
that was registered to No. 02 for authentication, set the value of
[Realm(Domain)] to [2].
– PKI Card Print uses authentication information of the PKI card;
therefore, it disables the authentication information specified in
[User Authentication].
7
Under [Output Method], select [PKI Card Print], and click [OK].
8
Send print data.