Konica Minolta bizhub 364e - Manual (Page 61)

How to Use the Authentication Unit 3
AU-211P 60
3.8.3 Handling Scan To Me
The following explains how to handle Scan To Me on the MFP.
!
Detail
• If the correct settings are configured to use Scan To Me, [Me] appears on
the Fax/Scan screen to send data to the user's e-mail address.
• If the system fails to obtain the certificate in the PKI card when encrypting
the e-mail to the user's address using the PKI card, [Me] will not appear.
For details on the e-mail encryption setting, refer to "Scan to E-mail (S/
MIME) Using the PKI Card" (page 40).
1
Tap [Scan/Fax].
2
Configure Scan option settings as necessary.
3
Tap [Me].
4
Load the original and press the [Start] key on the control panel.
This scans the original and sends data to the user's e-mail address.
2
Note
For details on scan conditions, refer to the User's Guide [Scan] supplied
together with the MFP.