Konica Minolta bizhub PRO C6500P - Manual (Page 149)

Calibration 141
8. Click Next .
9. Place both the printer and scanner charts next to each other
on the platen and follow the instructions in the Calibration
Wizard.
10. When the last chart is successfully measured, click Next to
apply the calibration to the required media types.
2.
Note: If the calibration chart is not placed within the defined scanning
area on the platen, the calibration process may not be successful. To
ensure that the calibration process is successful, on the printer, press
HDD>Calibration>Scan Settings. Then, press Size Settings>Full Area,
and then press OK.