Konica Minolta bizhub PRO C6500P User Manual
Page 33
Advertising
Printing a Job from a Client Workstation
25
4.
If desired, click
Properties
and modify the job parameters.
5.
Click
OK
.
6.
Click
OK
in the Print dialog box.
The file is sent to the IC-304 print controller.
Note: By default, the job parameters are displayed through the Print
Driver software. For more information about modifying job parameters,
see "Print Driver Software" on page 32.
If the Print Driver software is disabled, the job parameters are displayed
through the PPD file. For more information about the PPD file
parameters, and disabling the Print Driver software, see "Setting
Parameters in the PPD File" on page 233.
Advertising
This manual is related to the following products: