Konica Minolta bizhub PRO C6500P - Manual (Page 215)

Setting Parameters in the Job Parameters Window 207
each stack of pages is sorted in consecutive order. When
stacks are piled one on top of another, the entire job is
already sorted up or down.
• Saddle stitch: Use this option for a book-finishing technique
where the pages of a book are attached through stitching or
stapling in the spine fold —for example, brochures.
When Saddle stitch is selected, the sets per sheet option is
available. This option enables you to place two or four sets
of imposed booklets on a single sheet.
• Perfect bound: Use this option for a book-finishing technique
where the pages of a book are attached through trimming
of the spine fold, roughening the edges of the gathered
pages and gluing them together—for example, hardcover
books.
Size
Sheet size
¾ Select the required sheet size. If you select Custom , type the
required width in the W box, and the required height in the H
box.
Trim size
¾ In the Trim size list, select the desired trim size. If you select
Custom , type the required width in the W box, and the required
height in the H box.
Trim orientation
This option is view only. It is set to Portrait or Landscape according
to the page orientation selected in the Print > Paper Stock tab.
Trim size is the size of the finished, trimmed document.