Choosing a calibration mode, Performing off-the-glass calibration – Konica Minolta bizhub PRO C6500P User Manual

Page 147

Advertising
background image

Calibration

139

Choosing a Calibration Mode

The IC-304 print controller provides you with two calibration
modes:

Off-the-glass:

Uses the scanner platen to perform off-the-glass

calibration

Device tool: Uses the

GretagMacbeth® Eye-One®

spectrophotometer, which is a “high speed” color
measurement instrument, to report spectrophotometer and dot
data

Before you begin calibration, select the calibration mode in the
Preferences window, see "Calibration Device" on page 190.

Performing Off-the-glass Calibration

For best results:

After you perform the first calibration, you print the
IQ_Test_(TAB/A3).pdf file from the D:\Sample_Files\(USA/
Europe)\IQ Files folder. Each time you calibrate, use this file as
a visual reference to verify that the printer has returned to its
start point.

You calibrate both the printer and scanner at the same time. If
you only place the print chart on the platen, the printer is
calibrated. If you only place the scanner chart on the platen, the
scanner is calibrated

Table 12: Fixed density values for coated paper

Toner

Density value

Cyan

1.6930

Magenta

1.7706

Yellow

1.1949

Black

1.9838

Advertising
This manual is related to the following products: