Konica Minolta bizhub PRO C6500P - Manual (Page 225)

Setting Parameters in the Job Parameters Window 217
Color Mode
¾ Select one of the following options:
• Grayscale: To print the job as black and white using Black
(K) toner only. When a color job is printed using the
Grayscale option, the Cyan (C), Magenta (M), and Yellow (Y)
separations are also printed in Black (K) toner, giving a
dense appearance similar to the CMYK grayscale image.
• CMYK: To print the job in color using CMYK.
Color Adjustments
Brightness
¾ Select the required brightness level (the range starts from
Lightest , which applies -15%, to Darkest , which applies +15%).
Brightness is generally used to make last-minute adjustments to
the print job after proofing. By changing the
Brightness setting, you
can control how light or dark your output will appear.
Contrast
¾ Select a contrast level for the print job, (the range starts from
Less which applies -10%, to More which applies +10%).
Adjusting the Contrast enables you to control the difference
between the light tones and the dark tones in your image.
Contrast is generally used to make last-minute adjustments to the
print job after proofing.
Note: Grayscale images created in RGB applications, such as
PowerPoint, should be specified as Monochrome or submitted to the
system with Grayscale selected in the PPD file. This selection
ensures that grayscale images are counted as black and white
instead of color in both the IC-304 print controller and in the printer
billing meters.