Setting up scan boxes, Setting up a scan box on the printer – Konica Minolta bizhub PRO C6500P User Manual
Page 81
Remote Scanning Application
73
A typical scanning workflow with the Remote Scanning Application
is as follows:
Setting Up Scan Boxes
You can set up scan boxes in the following ways:
•
On the printer. You can then modify the scan box settings later
on the IC-304 print controller
•
With the Remote Scanning Application. This provides a central
location for the system administrator to manage the scan
boxes, and set security and email settings, see page 74
Setting up a Scan Box on the Printer
1.
On the printer’s touch screen,
press the SCAN key.
2.
On the printer’s touch screen, touch the
HDD
tab.
3.
Touch the
Address Input
button, and then touch the box name.
4.
Enter the box name, and then touch the
OK
button.
5.
Touch the OK button.
6.
Touch
Scan Settings
.
Note: When the [Register Name] and the [Search Character] is set, pressing
[Register] allows the destination to be registered.