Konica Minolta MS7000 MKII User Manual
Page 100
Miscellaneous
5
5-6
6
Press the Clear key.
This lets you leave the User mode, returning back to the ordinary
mode.
Settings in Each User Mode Function
U1: Special Print Mode
This function is not available.
U2: Engineering Enhancement Mode
Slight image distortion occurring in the scan direction can be corrected
with this function.
1
Select U2 in the User mode.
2
Press the Exposure Mode key to display d*.
3
Press the Exposure Adjustment key (Darker or Lighter) to select the
desired setting value.
4
Press the Start key to validate the setting value.
NOTE:
This setting returns to the default value when the Power Switch
is turned OFF.
You can register the setting value using with the Job Program.
☞
See p. 3-45.
Before Correction
After Correction
0816773201.book 6 ページ ２００４年６月２４日 木曜日 午後６時１４分