Konica Minolta MS7000 MKII - Manual (Page 37)

3 Scanner
3-11
Auto Masking Key
This key is used to turn the Auto Masking function ON or OFF. The Auto
Masking function will omit the frame (non-image area) of a printed film
image.
• The previous Centering/Fit setting is applied whenever ON is selected
from the OFF state.
• If OFF is selected from the ON state, Centering/Fit is disabled.
* Auto Masking is not applicable with the Masking or Trimming settings.
* This function is only available on the PR mode.
Auto Skew Correction Key
This key is used to turn the Auto Skew Correction function ON or OFF.
When this function is applied, the Auto Skew Correction LED will turn on
and the system will correct any skew of the image during printing.
* After printing, the skew can be reset or retained. Contact your Technical
Representative for more information.
Manual Focus Keys
Press repeatedly to manually adjust the focus of the image on the Screen.
AF (Auto Focus) Key
When this key is pressed, the Auto Focus LED will turn on and the system
will automatically find the optimum focus for the image on the Screen.
Once the image is in focus, the Auto Focus LED will turn off.

In the event that an image is not properly centered on the Screen
or the contrast and density of the image is such that it causes the
Auto Focus to error, the Auto Focus LED will blink. The LED will
turn off when the Manual Focus keys or the Auto Focus key is
pressed.
3
4
5
6
0816773201.book 11 ページ ２００４年６月２４日 木曜日 午後６時１４分