Konica Minolta MS7000 MKII - Manual (Page 99)

5 Miscellaneous
5-5
Entering and Leaving the User Mode
1 Hold down the Shift key and Output Selection key at the same time for
0.5 sec.
The Multi-Print Display displays a “U.”
2 Press the Exposure Adjustment key (Darker or Lighter) to select the
specific function.
Pressing tMhe Darker key selects the function in the following
order: U
→ U1→ U2 → U3 .. → U8.
Pressing the Lighter key selects the function in the following
order: U8
→ U7→ U6 → U5 .. → U.
3 Press the Exposure Mode key to display d(*).
*: Current setting value
4 Press the Exposure Adjustment key (Darker or Lighter) to select the
specific setting value.
Pressing the Darker key selects the setting value in the
following order: d0
→ d1 ..
Pressing the Lighter key selects the setting value in the
following order: d5
→ d4 ....d0
5 Press the Start key to validate the setting value.
If the Exposure Mode key is pressed, the setting value is not validated and
the User mode initial screen (U) appears.
If a new function is to be set, start the procedure over beginning with step
2.
S tart
0816773201.book 5 ページ ２００４年６月２４日 木曜日 午後６時１４分