Konica Minolta MS7000 MKII - Manual (Page 34)

Scanner 3
3-8
Multi-Print Keys
Use these keys to input the desired number of prints to be made.
10: Pressing this key increases the number of prints to be made in
increments of ten (10, 20, 30 ... 90, etc.)
1: Pressing this key increases the number of prints to be made in
increments of one (1, 2, 3 ... 9, etc.)
* This function is only available on the PR mode.
Clear/Stop Key
Press to clear the setting on the Multi-Print Display, resetting it to "1" or to
stop a multi-print cycle.
* This function is only available on the PR mode.
Start Key
Press to make a print (scan) of the image shown on the Screen.
Indicators
Misfeed/Call-Tech.-Rep. Indicator:
Lights up when a paper misfeed or malfunction occurs in the
system.
Wait Indicator:
Lights up when the Scanner is initializing.
Lights up when the Printer is warming up.
Closure Failure Indicator:
Lights up if the Printer cover is open.
Add Toner Indicator: Blinks when the Imaging Cartridge of the
Printer is running out of toner and lights up when the cartridge
has completely run out of toner.
Add Paper Indicator: Lights up when the Printer is not loaded
with the paper size selected for use, or when either the Paper
Feeding Tray or Paper Cassette has run out of paper with Auto
(auto paper selection) selected.
12
13
14
15
0816773201.book 8 ページ ２００４年６月２４日 木曜日 午後６時１４分