Konica Minolta MS7000 MKII - Manual (Page 106)

Miscellaneous 5
5-12
System Settings by the dealer
System Settings Description Selection Initial Setting
Auto reset Setting changes made to the control
panel that are not used within 60
seconds of being input are
automatically cancelled and the system
reverts back to the original settings. Enabled * (200V)
Disabled * (120V)
Auto power save
ON/OFF Sets the unit to enable or disable the
Auto Power Save mode. Enabled * (200V)
Disabled * (120V)
Auto power save
(PR mode only) Turns the Printer's fuser OFF if the
system is left idle for a specific period of
time.
* Priority is given to the Power Save
mode, if Power Save has been set.
Disabled
30 min. *
60 min.
Auto Projection
Lamp OFF Turns the Scanner's Projection Lamp
OFF if the system is left idle for a
specified period of time.
* Priority is given to the Power Save
mode, if Power Save has been set.
Disabled *
30 min.
60 min.
Fine mode
contrast select Applies the following functions as
required:
Contrast Emphasis: applied when film
contains text that is poorly contrasted
against its background making it
difficult to read.
Outline Emphasis: applied when film
contains blurred black and white
images. Contrast
Emphasis *
Outlie
Emphasis
Auto Skew
Correction Retain Determines whether or not to retain the
original (uncorrected) skew of a screen
image after the print has been made. Retained
Not retained *
Machine ID
Printing
(PR mode only) When two scanners are connected to
one printer, this function leaves an
identification marker on the print so that
the scanner used for the job can be
determined after printing. Disabled *
Pattern 1
Pattern 2
Cycle print mode\
(PR mode only) This function automatically scans the
next image following a preset period of
time (the period can be set by an
authorized Technical Representative).
Images are set by the user onto the
Carrier Glass in between cycles. Enabled
Disabled *
Paper Size of
Paper Feeding
Tray
(PR mode only)
Determines the desired paper size and
the orientation from the Paper Feeding
Tray of the printer. Same as the setting for U4 of
the User Mode. See page 5-7.
Pattern 1 Pattern 2
Paper Paper
0816773201.book 12 ページ ２００４年６月２４日 木曜日 午後６時１４分