Konica Minolta MS7000 MKII - Manual (Page 35)

3 Scanner
3-9
Control Panel 1 (Shift Function)
Job Recall Key
When this key is pressed together with the Shift Key, the program
registration locations (1J, 2J and 3J) are called. Each time this key is
pressed while the Shift Key is held down, the display is switched in order
of 1J
→ 2J → 3J.
Resolution Key
When this key is pressed together with the Shift Key, the resolution of the
Scanner is set.
When the Scanner is connected to the Printer: 4H and 6H
When the Scanner is connected to the PC: 2H, 3H, 4H, 6H and 8H
* 4H represents 400dpi and 6H represents 600dpi.
User Mode Key
Pressing this key together with the Shift Key enters the unit into the User
Mode.
See p. 5-4 User Mode.
Zoom Key
When this key is pressed together with the Shift Key, the electrical zoom
magnification is set.
Zoom+: When this key is pressed together with the Shift Key, the
magnification is increased by an increment of 0.01X (up to
2.00X).
Zoom clr: When this key is held down together with the Shift Key for one
second, the standard magnification is resumed.
Zoom-: When this key is pressed together with the Shift Key, the
magnification is decreased by a decrement of 0.01X (down to
0.50X).
PC/PR Key
When this key is pressed together with the Shift Key, the connection to the
PC or to the Printer is selected.
Shift Key
Executes an expansion function when being pressed together with the
intended function key.
1 2 4 5 6 3
1
2
3
4
5
6
0816773201.book 9 ページ ２００４年６月２４日 木曜日 午後６時１４分