Konica Minolta bizhub PRO 1050P - Manual (Page 37)

• Configure the tray for wide paper and enter the physical size of the
paper.
• In your application, select Print » Properties » bizhub PRO 1050
to open the printer driver plug-in.
• In the Paper panel, make sure that Default is selected as output
paper size (this is the default setting).
• In the Image Shifting panel, you may use Print Position to shift
the bitmap image to one edge of the paper.
• Click OK to confirm and print the job.
Note: When Creep Compensation or Gutter is set such that the bitmap exceeds
the target paper size, the bitmap will be clipped.
Konica Minolta bizhub PRO 1050 Printer Driver Windows Printing
• 37