1 selecting the finishing method, 1 selecting the finishing method -15 – Konica Minolta bizhub 421 User Manual
Page 42
Advertising
501/421/361
2-15
Using copy functions
2
*6
The Half-Fold and Center Staple & Fold settings are available only if the
saddle stitcher is installed on the optional finisher FS-522.
Follow the procedures described below to select Finishing settings.
2.6.1
Selecting the finishing method
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Select the desired Finishing settings.
– To return to the main screen, touch [Main Screen].
3
Touch [OK].
The Basic screen appears again.
Advertising
This manual is related to the following products: