Konica Minolta bizhub 421 - Manual (Page 71)

501/421/361 3-9
Using fax/scanning functions 3
3.2.3 Selecting a destination with an LDAP search
Follow the procedure described below to search for an E-mail address and fax
number registered with the LDAP server and select the destination.
!
Detail
In order to perform an LDAP search, LDAP must be enabled and an LDAP server
must be registered. For details on specifying LDAP settings, refer to the User’s
Guide [Network Administrator].
If user authentication is applied, whether or not to accept "Manual Destination
Input" is specified for each registered user. For details on the user registration,
refer to the User's Guide [Copy Operations].
1
Touch the Address Search tab.
– If multiple LDAP servers are specified, select the server to be searched,
and then touch [OK].