3 [ieee802.1x authentication setting, Ieee802.1x authentication setting] -30, Ieee802.1x authentication – Konica Minolta BIZHUB 223 User Manual
Page 170: Setting
bizhub 423/363/283/223
8-30
8.10
Using IEEE802.1X authentication
8
8.10.3
[IEEE802.1x Authentication Setting]
In the administrator mode of PageScope Web Connection, select [Network] ö [IEEE802.1x Authentication
Setting] ö [IEEE802.1x Authentication Setting].
Item
Description
Prior check
[Authentication
Status]
The authentication status is shown as follows.
•
[Authenticated]: The authentication has completed.
•
[Authenticating]: The authentication is in progress.
•
[Unauthenticated]: Not authenticated status.
•
[Authentication Failed]: The authentication has failed.
•
[Failed to Retrieve Status]: No authentication status
could be obtained.
When you press [Refresh], the authentication status is up-
dated.
[IEEE802.1x Au-
thentication Set-
ting]
Select [ON].
[Supplicant Set-
ting]
Configure settings required in order for this machine,
which is a supplicant (authentication client), to receive au-
thentication from the authentication server.
Configure settings to fit your environment.
[User ID]
Enter a user ID (up to 128 characters).
This user ID is used for all EAP-Type options.
[Password is
changed.]
Select this check box to change the password.
[Password]
Enter the password (up to 128 characters).
The password is used for all EAP-Type options other than
[EAP-TLS].