Konica Minolta BIZHUB 223 - Manual (Page 364)

bizhub 423/363/283/223 15-39
15.5 Glossary 15
Screen frequency The density of dots used to create the image.
Sender Fax No. An identification code used for the mutual recognition for fax transmission. Usu-
ally the fax number is registered for the fax ID.
Sender Name The name of a sender. On the receiver's side, the name is printed as a part of the
sender's information at the edge of the transmitted original.
Sending Sending indicates making a call. For fax, sending indicates sending originals or
dialing for pollings.
Shared printer A printer connected to a server on the network and configured to be used by mul-
tiple computers.
Sharpness A function to enhance the edge of characters before sending the document.
Single-page TIFF A TIFF file that contains only a single page.
SLP The acronym for Service Location Protocol, which is a protocol capable of finding
services on the TCP/IP network, and the automatic configuration of clients.
SMB The acronym for Server Message Block, which is a protocol allowing the share of
files and printers mainly over the Windows network.
SMTP The acronym for Simple Mail Transfer Protocol, which is a protocol used to trans-
mit or transfer E-mail.
SNMP The acronym for Simple Network Management Protocol, which is a management
protocol in the TCP/IP network environments.
Spool The acronym for Simultaneous Peripheral Operation On-Line.
Data to be output to a printer is not sent directly to the printer, but is temporarily
stored in another location. The stored data is then sent collectively to the printer.
SSL/TLS The acronym for Secure Socket Layer/Transport Layer Security,which is an en-
coding method used to transmit data between the Web server and a browser in
a secure manner.
Subnet mask A value used to divide a TCP/IP network into small networks (subnetworks).
This is used to identify how many higher-order bits of an IP address are used for
the network address.
Sub-scanning direc-
tion The vertical direction for scanning originals.
Super G3 (SG3) A G3 communication mode complying with ITU-T V.34. Compared with usual G3
communication, it allows the higher rate transmission (up to 33,400bps).
TCP/IP The acronym for Transmission Control Protocol/Internet Protocol, which is a de
facto standard protocol widely used for the Internet.
An IP address is used to identify each network device.
TCP Socket TCP Socket indicates an API used for the TCP/IP network. This socket is used to
open a transmission route for input or output of usual files.
Temporary docu-
ment saving A function to save received documents automatically to memory when the ma-
chine is unable to print the documents for some reason such as running out of
paper. When a proper action is taken such as refilling of paper, the temporarily
saved document is printed out.
Temporary forward
transmission A function to manually forward the received original that is in the standby state to
be output, by using the setting check button on the Control Panel. The function
must be set while the fax/scan screen is displayed, otherwise the operation will
be halted due to the paper running out or a paper jam.
Thumbnail A function to display the content of an image or document file as a small image
(image displayed when the file is opened).
TIFF The acronym for Tagged Image File Format. It is a file format used to save image
data. (The file extension is ".tif"). By using the "tag" indicating the data type, in-
formation for various image formats can be saved in a single image data.
Timer TX A function to transmit a fax at the specified time. It reduce costs by transmitting
faxes in the late evening or early morning when discount telephone services are
available.
Transmission reser-
vation A function to program the next transmission during transmission or printing.
Term Description