4 scanning, 1 sending scanned data to a computer on network, Scanning – Konica Minolta BIZHUB 223 User Manual
Page 39: Sending scanned data to a computer on network -2, Sending scanned data to a computer on network, P. 4-2), 4scanning
bizhub 423/363/283/223
4-2
4.1
Sending scanned data to a computer on network
4
4
Scanning
4.1
Sending scanned data to a computer on network
Configure settings to send scanned data to a computer on network (SMB transmission).
Before SMB transmission, configure settings to share files in Windows using the computer that receives data.
If Samba is installed, data can be transmitted to a computer that is equipped with a non-Windows OS. SMB
transmission is also available for the CIFS service (TCP/IP) that is running on the NetWare server.
To specify a computer over a router using the Windows name (NetBIOS name), use the WINS server.
To perform SMB sending in the IPv6 environment, enable the direct hosting service. Enabling the direct host-
ing service allows you to specify the destination with the IPv6 address or computer name (host name). When
specify the destination with the computer name (host name), use the DNS server to obtain the IPv6 address.
To send data to a computer with Windows Vista/Server 2008/7 installed, you can perform name resolution
using the LLMNR function even if DNS server is not present. To perform the name resolution especially in the
IPv6-only communication environment under Windows Vista/Server 2008/7, it will be convenient to enable
the LLMNR function.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
IPv6 environment?
No
Yes
Do you use the WINS server?
Yes
No
Do you send data to Win-
dows Vista/Server
2008/7?
No
Yes
Finish