Konica Minolta BIZHUB 223 - Manual (Page 202)

bizhub 423/363/283/223 10-8
10.2 Searching for the E-mail address in the LDAP server 10
10.2.4 LDAP over SSL
[Setting Up LDAP]
In the administrator mode of PageScope Web Connection, select [Network] ö [LDAP Settings] ö [Setting
Up LDAP] ö [Edit].
[Authentication
Method] Select the authentication method to log in to the LDAP
server.
The authentication method must match that used in the
LDAP server.
If [anonymous] is selected, [Login Name], [Password], and
[Domain Name] can be omitted.
If [GSS-SPNEGO] is selected, log in to the server in the
Kerberos authentication method. The Kerberos authenti-
cation method is supported by Active Directory. Server authentica-
tion method
[Login Name] Enter the login name to log in to the LDAP server (up to
255 bytes).
[Password is
changed.] Select this check box to change the password.
[Password] Enter the password to log in to the LDAP server (up to 128
bytes, excluding space and ").
[Domain Name] Enter the domain name to log in to the LDAP server (up to
64 characters).
If [GSS-SPNEGO] is selected, enter the domain name of
Active Directory. • Authentication
Method
• Domain name
[Select Sever Au-
thentication Meth-
od] Select the server authentication method.
Select [Set Value] to use the settings of [Login Name],
[Password], and [Domain Name].
Select [User Authentication] to use the user name and
password specified for user authentication.
If [Dynamic Authentication] is selected, the system
prompts you to enter the user name and password at
LDAP searching.
[Use Referral] Select whether to use the referral function.
Make an appropriate choice to fit the LDAP server envi-
ronment.
[Search Condition
Attributes] Select the attribute of the name used for LDAP searching.
You can toggle this attribute between [Name] (cn) and
[Nickname] (displayName). Name attribute
[Initial Setting for
Search Details] Specify LDAP search conditions.
Item Description Prior check
Item Description Prior check
[Enable SSL] Select this check box to encrypt an SSL communication
between this machine and the LDAP server. Does the server sup-
port SSL?
[Port Number
(SSL)] Enter the port number to be used for SSL communication.
Default setting: 636 Server port number
[Certificate Verifi-
cation Level Set-
tings] To verify the server certificate, configure settings to verify
the certificate.
[Validity Period] Select whether to check that the server certificate is within
the validity period.
[CN] Select whether to check that the CN of the server certifi-
cate matches the server address.
[Key Usage] Select whether to check that the server certificate is used
according to the purpose approved by the issuer.