Konica Minolta BIZHUB 223 - Manual (Page 214)

bizhub 423/363/283/223 10-20
10.6 Reporting the status of this machine (TRAP) 10
10.6.4 [Status Notification Setting]
In the administrator mode of PageScope Web Connection, select [Maintenance]ö[Status Notification Set-
ting]ö[IP Address] or [IPX Address]ö[Edit].
Item Description Prior check
[Destination Ad-
dress] If the destination has an [IP Address], enter it. If the DNS
server has already been configured, you can enter the
host name instead. When using IPv6, you can specify the
IPv6 address.
If the destination has an [IPX Address], enter it using an 8-
digit hexadecimal value. Notification address
[Port Number] If the destination has an [IP Address], enter its port
number.
[Node Address] If the destination has an [IPX Address], enter the node ad-
dress using a 12-digit hexadecimal value.
[Community Name] Enter a community name (up to 15 characters).
[Replenish Paper
Tray] Sends a notification when the paper tray is empty.
[JAM] Sends a notification when a page has been jammed.
[PM Call] Sends a notification when the periodical inspection is re-
quired.
[Replace Staples] Sends a notification when there are no staples remaining.
[Replenish Toner] Sends a notification when the toner is empty.
[Finisher Tray Full] Sends a notification when the capacity of the finisher tray
has been exceeded.
[Service Call] Sends a notification when a service call has occurred.
[Job Finished] Sends a notification when the job has finished.
[Hole-Punch Scrap
Box Full] Sends a notification when you need to empty the punch
scrap box.
[Waste Toner Box
Full] Sends a notification when the waste toner box needs to be
replaced.
[Drum Unit/Devel-
oping Unit Life] Sends a notification when the drum unit or developing unit
needs to be replaced.
[Fusing Unit Yield] Sends a notification when the fusing unit needs to be re-
placed.
[Transfer Roller
Yield] Sends a notification when the transfer roller unit needs to
be replaced.
[Transfer Belt Unit
Yield] Sends a notification when the transfer belt needs to be re-
placed.
[Ozone Filter Yield] Sends a notification when the ozon filter needs to be re-
placed.