Setting the overwrite all data – Konica Minolta bizhub 420 User Manual
Setting the Overwrite All Data
<Setting can be made only from the control panel>
Enter the Administrator Mode on the MFP display, Utility/Counter button > Administrator Settings > Input
Admin Password > Security Setting > HDD Settings
Touch [Overwrite All Data].
Select the desired mode and touch [Overwrite].
A message appears that prompts you to confirm whether you want to overwrite all data. Touch [Yes].
Make sure that a message appears prompting you to turn OFF and then ON the main power switch. Now,
turn OFF and then turn ON the main power switch.
This manual is related to the following products: