Konica Minolta bizhub 420 - Manual (Page 4)

If the HDD Lock Password entered does not comply with the Password Rules, a message appears
stating that the HDD Lock Password entered cannot be used. Enter the correct HDD Lock
Password. For details of Password Rules, see “Password Rules” in Appendix C.
6
To prevent entry of a wrong password, enter the 20-digit HDD Lock Password once again.
7
Touch [OK].
?
What happens if there is a mismatch in the HDD Lock Passwords?
If there is a mismatch in the HDD Lock Passwords, a message appears stating that there is a
mismatch in the HDD Lock Passwords. Perform steps 4 and 5 once again.
8
Make sure that a message appears prompting you to turn OFF and then ON the main power switch. Now,
turn OFF and then turn ON the main power switch.
Note:
It is critical that the Administrator not forget any of the passwords. To correct a forgotten password will
require a service technician, replacement parts and significant cost and down time to be corrected.