Konica Minolta bizhub 420 - Manual (Page 8)

4
Enter the new 20-digit Encryption Key from the keypad.
h [Cancel] to go back to the HDD Setting screen.
6
To n.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
ch [Shift] to show the upper case/symbol screen. – Tou
– Touc
5
Touch [OK].
prevent entry of a wrong Encryption Key, enter the 20-digit Encryption Key once agai
8
wer switch. Now,
turn OF
7
Touch [OK].
Make sure that a message appears prompting you to turn OFF and then ON the main po
F and then turn ON the main power switch.