1 tcp/ip settings, Tcp/ip settings -108 – Konica Minolta bizhub 501 User Manual
Page 121
501/421/361
1-108
Setup items by operation
1
1.36
Limiting users using this machine (Windows domain/workgroup)
Specify settings for limiting users of this machine using NTLM authentication.
To perform authentication using NTLM when using Windows NT4.0 or using Active Directory of Windows
2000 Server or Windows Server 2003, use this setting. This setting limits functions available on a user basis.
This machine supports the Direct Hosting service. When the NTLM authentication is made in the IPv6
environment, the Direct Hosting setting is required to be enabled. Enabling the Direct Hosting setting allows
this machine to use the DNS server to obtain the IPv6 address of the Windows server.
Specify the settings according to the following flowchart.
1.36.1
TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
When the NTLM authentication is made in the IPv6 environment, the Direct Hosting setting is required to be
enabled. With the DNS server set up, be sure to make the DNS setting of this machine correctly.
For details, refer to
"Specifying general settings for TCP/IP-based communication" on page 1-2
IPv6 environment?
No
Yes
Use the WINS server?
Yes
No
Finish