Konica Minolta bizhub 501 User Manual
Page 228
501/421/361
3-10
Appendix
3
Sub-scanning direction
The vertical direction for scanning documents.
Super G3 (SG3)
This is a G3 communication mode standardized by ITU-T V.34. The communication
becomes possible at a higher speed (high speed 33,400 bps) than that of the usual
G3 communication.
TCP/IP
Abbreviation for Transmission Control Protocol/Internet Protocol.
This is the de facto standard Internet protocol.
IP addresses are used to identify respective network devices.
TCP Socket
Refers to the network API used with TCP/IP. A transmission route is opened using
this socket to input and output normal files.
Temporary document saving
This is a function for automatically saving the received document in the memory
when the machine cannot print the received document, such as when the machine
has run out of paper. When paper is added, the document that has been temporarily
saved is printed.
Temporary Forward transmis-
sion
This is a function to manually forward the received document on hold, by using the
setting confirmation button of the control panel. The transmission is used when the
fax/scan screen is been displayed, or the operation is being stopped due to paper
misfeed or running out of paper.
Thumbnail
A small image that shows the contents of an image or document file (the image dis-
played when the file is opened).
TIFF
Abbreviation for Tagged Image File Format. One of the file formats for saving image
data. (The file extension is ".tif"). Depending on the tag indicating the data type, in-
formation for various image formats can be saved in a single image data.
Timer TX
A function for sending a fax at a specified time. Sending faxes at discounted calling
times, such as late at night or early in the morning can help to reduce the transmis-
sion costs.
Transmission reservation
This is a function to reserve the next transmission while current transmission or print-
ing.
Transmission speed
Specifies the transmission speed of modem for fax. In this function, the fax can be
communicated at a high transmission speed of 33,600 bps. When overseas commu-
nication mode is set, it communicates at a high transmission speed a with a noise of
7200 bps or 4800 bps.
Transmission source record
When a fax has been sent, the transmission time, name, telephone number, page
number that is to be printed at the edge of the document saved on the recipient’s
machine.
Transmission time
The time needed to send a fax. The higher the resolution or larger the paper, the long-
er the transmission takes.
TrueType
An outline font. It was developed by Apple Computer and Microsoft. It is used as a
standard by Macintosh and Microsoft Windows.
It can be used both on a display and in print.
TSI
Abbreviation for Transmitting Subscriber Identification. ID of the fax transmission ter-
minal.
TWAIN
The interface standard for imaging devices, such as scanners and digital cameras,
and for applications, such as graphics software.
In order to use a TWAIN-compliant device, the TWAIN driver is required.
Uninstall
To delete software installed on a computer.
USB
Abbreviation for Universal Serial Bus.
A general interface standard for connecting a mouse, printer, and other devices to a
computer.
V34
This is a communication mode used at the time of fax communication of super G3.
There are cases when the communication is not possible in super G3 mode depend-
ing on the telephone line conditions when the recipient’s machine/ own machine is
connected to a telephone line via private branch exchange. In such cases, it is rec-
ommended to communicate with super G3 mode turned off by deselecting the V34.
Web browser
Software for viewing Web pages.
Internet Explorer and Netscape Navigator are this type of software.
WINS
Abbreviation for Windows Internet Naming Service. A service for recalling name serv-
ers for the conversion of computer names and IP address in a Windows environment.
Zone
A name given in an AppleTalk network. This is used to group multiple devices on an
AppleTalk network.
Z-Folded Original
This function first confirms the document size which cannot detect correct document
size due to folds, then scans and sends the document data after verifying the correct
document size. This function can be used only when the document is scanned by
ADF.
Term
Description